64E Foam Cleaner for Intake, Combustion Chambers, Catalyst + Turbo 400ml

A highly effective foam cleaner based on Carbon X technology for cleaning the intake system, turbo, and catalyst in gasoline and diesel engines. It removes carbon deposits, improves the air-to-fuel ratio, and restores engine performance.
For professional use in workshops only, and requires technical expertise.
• Cleans the intake system, turbo, and exhaust filter (catalyst).
• Removes accumulated carbon deposits and dirt.
• Improves the air-to-fuel ratio to restore combustion efficiency.
• Enhances turbo performance and restores engine power.
Usage:
For all gasoline and diesel cars. To be used only in workshops by professional technicians.
Directions for use:
1. Cleaning the intake system:
Spray half of the can using the hose into the end of the cold intake manifold (cold section), pulling the hose slowly to ensure even foam distribution.

Wait 20–30 minutes, then start the engine and drive the car for 5 km or run it for two minutes at 3000 RPM.
Repeat the process with the remaining half if needed, and wipe off any remaining residue.
2. Cleaning the catalyst:
Remove the front oxygen sensor, then spray the entire can through the sensor opening.
Wait 20–30 minutes, then start the engine and drive the car for 5–10 km, or let it run for 10 minutes at 3000 RPM.
3. Cleaning the turbo:
Spray half of the can into the turbo's air intake side while continuously moving the VTG lever by hand.
Leave it for 20–40 minutes, then repeat the process with the remaining half.
Run the engine for 10 minutes at 2000 RPM.
Size: 400 ml